T8 reflow soldering station
Please notice the table under reflow oven is not included into the machine.
Used for PCB soldering in SMT production line. In this series have other models: T5S/T5/T8L
Each zone introduction:
T5/ T5L------ First: prehead zone; second: soldering zone; third: drying zone: fourth&fifth: bottom-side heat zones. Each zone is heating/ cooling independently, cooling zone is strong wind refrigerating system.
T8L------------ First: fast preheat zone; second/third: drying zones ; fourth: soldering zone; fifth/sixth/seventh: bottom-side heat zones. Each zone is heating/ cooling independently, cooling zone is used strong wind refrigerating system.
We also supply other models of reflow oven as: T-962A, T962C, T-960 series.
T962A:
T-962C:
T-960:
You can choose against your actual need, if any question could contact our sales service.
Thanks !
Please notice the table under reflow oven is not included into the machine.
Used for PCB soldering in SMT production line. In this series have other models: T5S/T5/T8L
Model | T8L | T5L | T5 |
Lx Wx H (mm) | 2100x700x1280 | 1700x700x1280 | 1700x612x650 |
N.W. (kg) | 300 | 210 | 120 |
Peak power (kw) | 12 | 7 | 7 |
Work power (kw) | 5 | 3 | 3 |
Input voltage (V) | 380/220 | 380/220 | 380/220 |
Conveyor width(mm) | 300 | 300 | 300 |
Max. height of component (mm) | 55 | 55 | 55 |
Max. speed of conveyor (mm) | 1200 | 1200 | 1200 |
Each zone introduction:
T5/ T5L------ First: prehead zone; second: soldering zone; third: drying zone: fourth&fifth: bottom-side heat zones. Each zone is heating/ cooling independently, cooling zone is strong wind refrigerating system.
T8L------------ First: fast preheat zone; second/third: drying zones ; fourth: soldering zone; fifth/sixth/seventh: bottom-side heat zones. Each zone is heating/ cooling independently, cooling zone is used strong wind refrigerating system.
We also supply other models of reflow oven as: T-962A, T962C, T-960 series.
T962A:
Voltage | 220V/60HZ 110V/50HZ |
Output power | 1500w |
Max soldering area | 300*320mm |
Temperature rage | 0-280ºC |
cycle time | 1-8min |
T-962C:
Voltage | 220V/60HZ 110V/50HZ |
Rated power | 2500W |
Drawer size | 400x600mm |
Temperature rage | 0-280ºC |
Cycle time | 1-8min |
T-960:
Model | T-960 | Speed of conveyer belt | 0-1600mm/min |
The heating zone qty | upper 3/down 2 | Power supply | 380/220V |
The length of heating zone | 960mm | peak power | 4.5kw |
The heating type | inteligent level sirocco and rapid infrared heating | Heating up time | about 15mins |
The cooling zone qty | 1 | Temperature control range | room temperature~300ºC |
Max. width of PCB board | 300mm | Temperature control accuracy | +/-3ºC |
Operation direction | left→right | Overall dimensions | 1450*630*470mm |
Delivery options | net transmission+chain transmission | Weight | 90k |
You can choose against your actual need, if any question could contact our sales service.
Thanks !